Motorcycle precautions

1. Do not go to the car wash shop or ask someone else to help wash the car unless you have to. The car wash shop may seem to have complete tools and standardized operation, but its pursuit of efficiency and effectiveness is not good. If not done well, it can also cause problems with the cremation plug and various circuits.
2. Make sure to cool down the hot car before washing it. Suddenly flush the engine, exhaust pipe and other parts with cold water. Everyone knows the principle of thermal expansion, which will damage the oil seals of various parts and lead to engine oil leakage. This is the reason why many Moloto engines have slight oil leakage. It can also cause the chromium coating at the connection between the exhaust pipe and the engine to detach, oxidize, and rust.
3. Headlights, left and right handrails, switches, exhaust vents (preferably plugged with something), horns, cremation plugs, air filters, batteries, and other parts should not be directly flushed with water. These parts all have electrical circuits, which can cause short circuits or electric leakage after wetting, resulting in problems such as lights not working, horns not sounding, not catching fire, and driving weakness. It is best to use a cloth to wipe them.
4. When washing the car, it is important to clean the lower part of the engine and the heat sink thoroughly. It is recommended to use a toothbrush dipped in detergent to clean the car. This not only has the advantage of being aesthetically pleasing, but also makes it easy to detect problems such as engine oil leakage.
5. After washing the car, the entire vehicle should be wiped dry with a dry cloth, especially the switches, instruments, left and right handrails, cremation plugs, fuel tank covers, and other parts. Special attention should be paid to removing the cremation plug cap and throwing it a few times to remove the water from the upper sleeve, otherwise it will affect the ignition.
6. After drying, start the vehicle, idle the support stand for 5-10 minutes, drain the water from the exhaust pipe, and then drive at medium speed on the road for a few minutes or dry it in a shaded area. Do not expose it to the sun.
7. Every time it rains, ride your bike home and love your bike. After entering the warehouse, pay attention to wiping the car dry, especially the exhaust pipe. Nowadays, the pollution is severe, and the rainwater is acidic. This is mostly the reason why the exhaust pipe rots early. Although it is troublesome, it is definitely the way to love your bike.
8. After cleaning the car, the outer shell can be sprayed with wax and wiped evenly with a fine sandcloth. The chain needs to be re lubricated.